Configuring a Manage IP Address on Juniper Networks NetScreen Device (KB ID: KB4067)
| Article ID: | KB4067 |
|---|---|
| Former Article ID: | ns10030 |
| Published: | Feb 06, 2006 |
| Last Modified: | Feb 06, 2006 |
| Visible By: | Employee, PTAC, Partner, Customer, Public |
Back to Previous Page | Knowledge Base Home
Article URL
Synopsis
Configuring a Manage IP Address on Juniper Networks NetScreen Device
Problem
Solution
This article applies to ScreenOS 4.0 and 5.0.
A Manage IP address is used to manage your NetScreen device through a Telnet session, SSH, SSL or through the WebUI management application.
To configure a manage IP address, perform the following steps:
Open the WebUI. For more information on accessing the WebUI, go to Accessing Your NetScreen Using the WebUI.
From the NetScreen options menu, click Network, and then click Interfaces.
From the interface list, choose the interface from which you wish to create the Manage IP address, click Edit. For this example, we chose to edit the Manage IP for the ethernet1 interface.
From the Manage IP text box, enter the IP address you want to use to manage your NetScreen. The Manage IP address must be different than the IP address of the physical interface, but on the same subnet.
Click OK.
Category Description
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-25
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-50
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-204 (EOL)
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-208 (EOL)
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5200
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5400
By Product » Software » Network Operating Systems » ScreenOS Software
By Network Technology » Non-IP Protocols » Security » Authentication
By Network Technology » Network Management
Purpose
Troubleshooting