Configuring an L2TP IP Pool on the Juniper Firewall

This article applies to ScreenOS 5.0 and above.

To configure an L2TP IP pool on the Juniper Firewall, perform the following steps:

Open the WebUI. For an example of how to access the WebUI, consult: KB4060 - Accessing Your NetScreen, SSG, or ISG Firewall Using the WebUI

From the ScreenOS options menu, click Objects, and then click IP Pools.

Click New.

From the Edit screen, enter an IP Pool Name, a Start IP, and an End IP.

For this example, we have chosen an IP Pool Name of global, a Start IP of 10.10.2.100, and an End IP of 10.10.2.180.

To avoid potential routing problems, make sure the IP Pool is on a different IP Subnet than the Trust Zone.

Click OK.

Troubleshooting