How Do I Add a Route to the Virtual Router?

The following procedure explains how to add a route to the virtual router using the WebUI. A route can also be added to the virtual router via the Command Line Interface (CLI) by entering the following command:

ns208-> set route 0.0.0.0/0 gateway 210.1.1.2

To add a route to the virtual router, perform the following steps:

Open the WebUI. For more information on accessing the WebUI, go to Accessing Your NetScreen Using the WebUI.

From the NetScreen options menu, click Network, select Routing, and then click Routing Entries.

Click New.

In the Network Address/Netmask text box, enter 0.0.0.0/0.

Click to select Gateway.

From the Interface drop down menu, click to select ethernet3. From the Gateway IP Address text box, enter the ethernet3 IP address.
Some NetScreen devices will list untrust in place of ethernet3.

Click OK.