Knowledge Center - Search

FILTER RESULTS

By Technology:
MX960 (4)
By Source:

×
Login for secure content  Login Required | Search Tips
Select  at least  one Content Source:  [All | None]
Knowledge Base Technical Documentation
Technotes Security Advisories
J-Net Forums(solved items) Technical Bulletins Login Required
Include Archived Items
 
Searched for: fpc8 ASIC 0 WEDGE: LUCHIP(0) Wedge Detected

RESULTS:

CMS-XML[KB24641] - [MX] Syslog Message: pio_read_u64() failed and jspec_pio_read_u256 failed ()
... memory integrity and finds an error. fpc 11 LUCHIP ( 0 ): pio ... IDMEM[ 0 x%x]-addr=0000000e000ab340 fpc 11 LUCHIP ( 0 ) IDMEM[87656] read error. ... fpc8 LUCHIP (2): pio_handle(0x436aaa48); jspec_pio_read_u256 failed: 1(generic failure)! ... fpc8 LUCHIP (2) GUMEM[1].ucode.instr[1285] ... fpc8 trinity_pio: 1 PIO errors occurred
By Technology: Router Products MX Series MX960
Login Required Source: Knowledge Base
CMS-XML[KB26276] - [MX] Understanding the fabric wedge condition in the Trinity (Trio) based FPC
Related log messages fpc3 CMTFPC: fstream wedge outstanding requests 4 pfe 0 plane 1 fstream 1 fpc3 CMTFPC: fstream wedge outstanding requests 4 pfe 0 plane 5 fstream 1
Login Required Source: Knowledge Base
CMS-XML[KB18989] - Syslog message: PFE: .*imq_stream_disable_stream.*
feb1 ICHIP(0) imq_stream_disable_stream() failed to disable physical queue 0 in stream 3 POSSIBLE CAUSES: This particular message can be misleading; because, while it does indicate that an error occurred, this error usually only appears when an I-chip wedge condition has been recovered.
Login Required Source: Knowledge Base
CMS-XML[KB23173] - Resolution Guide - MX - Troubleshoot Fabric Planes in Fault or Check State
SNIP LUCHIP ( 0 ) channel statistics : LUCHIP(0)-chan-rx-0 = MQCHIP(0)-chan-tx-4 60261371309051 (7612705) 6 (6)
By Technology: Router Products MX Series MX960
Login Required Source: Knowledge Base
CMS-XML[kb25102] - [MX/EX] Error Message: re0 fpc8 PCI INFO: 2:2:7:0 Correctable Counts: rxe 1
*/PCIe error types: Correctable and Uncorrectable Correctable An error that can be corrected has been detected .
By Technology: Router Products MX Series MX960
Login Required Source: Knowledge Base
CMS-XML[KB19882] - Debugging MX MPC Erroneous IDMEM Parity errors
If the memory is not being used by software (as shown by the output of the previous command), the error can be cleared by writing valid data to the location; as shown below: NPC3(bx01 vty)# set luchip 2 mem imem 0x00052274 0 1 Read the memory location to check if the correct value is in this location: NPC3(bx01 vty)# show luchip 2 mem imem 0x00052274 1
By Technology: Router Products MX Series MX960
Login Required Source: Knowledge Base
CMS-XML[KB25189] - [M/MX/T-series] The '%PFE-3: invalid nh (4241)' error message is generated for bulk statistics
The forwarding table indicates that the next hops are installed correctly. Next, the status of the next hops was checked on another FPC. The issue was reported in FPC11; FPC8 was checked:
Login Required Source: Knowledge Base
Redirecting...
 
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.