Knowledge Center - Search

FILTER RESULTS

By Technology:
MX960 (1)
By Source:

×
Login for secure content  Login Required | Search Tips
Select  at least  one Content Source:  [All | None]
Knowledge Base Technical Documentation
Technotes Security Advisories
J-Net Forums(solved items) Technical Bulletins Login Required
Include Archived Items
 
Searched for: object

RESULTS:

CMS-XML[KB24948] - [M/MX/T-series] Default behavior of loose ERO's (Explicit Route Objects) when used to form RSVP signaled LSPs
Loosely defined ERO s will not be shown as the loose type under Computed ERO object , when the output of show mpls lsp extensive
Login Required Source: Knowledge Base
CMS-XML[kb18760] - Syslog message: AUTHD_AUTH_CREATE_FAILED
The generic authentication service process (authd) could not allocate an authentication object for the indicated reason. The authentication service process is a security service that verifies an identity that is claimed by or for a system entity.
Login Required Source: Knowledge Base
CMS-XML[KB18757] - Syslog message: AUDITD_RADIUS_OPEN_FAILED
The audit process (auditd ) could not create a RADIUS object handle, which it uses for various RADIUS operations.
Login Required Source: Knowledge Base
CMS-XML[KB22321] - [M/MX/T-Series] Meaning of the 'no ssh support daemon binary /usr/sbin/sshd not found' message
daemon binary /usr/sbin/sshd not found /usr/libexec/ld-elf.so.1 shared object libcrypto.so.3 not found required by cgatool
By Technology: Router Products MX Series MX960
Login Required Source: Knowledge Base
CMS-XML[kb20380] - [WLC] How do I run traces for debugging
To focus on the object of the trace, you can add one or more of these parameters to the set trace command: MX# set trace [area] [mac-addr mac-addr] [port port-num] [user username] [level level] To stop the trace activity, use the following command: MX# clear trace {area name | all} To save accumulated trace data for enabled traces to a file in the MX nonvolatile storage, use the following command: MX# save trace filename
Login Required Source: Knowledge Base
CMS-XML[KB21272] - Incorrect default settings for FPC when setting the MX up as a GGSN/PGW using the MobileNext code
control-cores 1; object -cache-size 512; total-wired-memory 2560;
Login Required Source: Knowledge Base
CMS-XML[kb27404] - [SRC] How to enable SAE to accept a 32 bit mask for JSRC IP subscribers
13:24:28.739 HKT 07.05.2013 [default@ MX-router-mx480@juniper.net;0;4;1367902304] [ISEExtIntf] [10] userIpMask is set to 24 13:24:28.739 HKT 07.05.2013 [default@ MX-router-mx480@juniper.net;0;4;1367902304] [ISESolicitedJob] [10] created a new session object ……
Login Required Source: Knowledge Base
CMS-XML[kb26041] - [MX] Classification of incoming packets by using the inner VLAN tag on DPC and MPC chipsets
/2/0.32767, Index: 99 Object Name Type Index Scheduler-map default Output 2 Logical interface: xe-11/2/0.333, Index: 98 Object Name Type Index Traffic-control-profile q-350m-tp-9 Output 36375 Classifier access-tp-9 ieee8021p 40387
Login Required Source: Knowledge Base
CMS-XML[KB23375] - [MX] How to identify the 'Queues in use' value in the output of the 'show class-of-service interface ge-xxx' command
Object Name Type Index Classifier ipprec-compatibility ip 13 lab@mx480-c-re1 show interfaces queue ge-1/0/0
Login Required Source: Knowledge Base
CMS-XML[kb23505] - [Junos] Upgrade from 9.3R4 to 10.4 needs the no-validate knob
Validating against /config/juniper.conf.gz /usr/libexec/ld-elf.so.1: Shared object libisc.so.2 not found, required by mgd Validation failed
Login Required Source: Knowledge Base
CMS-XML[kb20246] - [WLC] How do I Configure SNMP
—An SNMP management application using the string can read object values on the MX but cannot set (write) them. This is the default.
Login Required Source: Knowledge Base
CMS-XML[KB27227] - How to enable IDP services in MX routers using MX/MSDPC card
Configuration: Below is the configuration to enable IDP services for MX routers with MSDPC set chassis fpc 0 pic 0 adaptive-services service-package extension-provider control-cores 1 set chassis fpc 0 pic 0 adaptive-services service-package extension-provider data-cores 7 set chassis fpc 0 pic 0 adaptive-services service-package extension-provider object -cache-size 1280 set
Login Required Source: Knowledge Base
CMS-XML[KB27228] - [MX] What is the cause for IDP status error: "idpinfo_get_status: Failed to retrieve status from data plane"?
data-cores 7; object -cache-size 1280; policy-db-size 200;
Login Required Source: Knowledge Base
CMS-XML[KB25539] - [Subscriber Management] Sample configuration to enable the dhcpv6 relay functionality on a MX-series router
packet_decode: dhcpv6 pkt parsing - End Aug 10 13:24:59 [DEBUG] client_key_compose_dhcpv6: Successfully composed CK_TYPE_V6_CLIENT_ID (3) client key object .
Login Required Source: Knowledge Base
CMS-XML[KB28735] - [M/T/MX] SNMP polling not working after upgrading Junos
In the SNMP configuration, the routing-instance name is required under the community stanza and routing-instance-access. In order to access MIB objects and perform SNMP operations for the routing-instances, SNMP v1 and v2c clients must encode the routing-instance name in the community string in their SNMP requests.
Login Required Source: Knowledge Base
CMS-XML[KB28871] - Junos Configuration Modes
Dynamic: Used for systems that have thousands of lines of policies configured. BGP is the only protocol to which you can apply routing policies that reference policies and policy objects configured in the dynamic database. Good:
Login Required Source: Knowledge Base
CMS-XML[kb26078] - [M/MX/T-Series] Troubleshooting Checklist - SNMP
http://www.juniper.net/techpubs/en_US/junos/topics/task/configuration/snmp-best-practices-monitoring-options.html : Check if MIB objects are registered with the SNMPD Trace SNMP Activity by using trace-options
Login Required Source: Knowledge Base
Redirecting...
 
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.