Knowledge Center - Search

×
Login for secure content  Login Required | Search Tips
Select  at least  one Content Source:  [All | None]
Knowledge Base Technical Documentation
Technotes Security Advisories
J-Net Forums(solved items) Technical Bulletins Login Required
Include Archived Items
 
Searched for: basics

RESULTS:

Pages: [ Next ]
CMS-XML[kb25012] - [ScreenOS] Basic Dial-up VPN configuration with the Avaya VPNremote VPN client
[ScreenOS] Basic Dial-up VPN configuration with the Avaya VPNremote VPN client
Login Required Source: Knowledge Base
CMS-XML[KB13649] - Traffic Does Not Pass thru SSG, Even Though Debug Flow Basic and Snoop Shows Packet Going Out
Traffic Does Not Pass thru SSG, Even Though Debug Flow Basic and Snoop Shows Packet Going Out
Login Required Source: Knowledge Base
Discussion2 very basic questions ? [ from a new juniper enth... - J-Net Community
2 very basic questions ? [ from a new juniper enth...
http://forums.juniper.net/t5/ScreenOS-Firewalls-NOT-SRX/2-very-basic-questions-from-a-new-juniper-enthusiast/m-p/103904/...
DiscussionRe: 2 very basic questions ? [ from a new juniper ... - J-Net Community
Re: 2 very basic questions ? [ from a new juniper ...
http://forums.juniper.net/t5/ScreenOS-Firewalls-NOT-SRX/2-very-basic-questions-from-a-new-juniper-enthusiast/m-p/104102/...
CMS-XML[KB7148] - What does a NetScreen firewall checks during the Sanity Check ?
debug flow basic shows: packet passed sanity check check IP version to see if it s valid. check IP length to see if it could exceed the MTU size (default=1500).
Login Required Source: Knowledge Base
CMS-XML[KB5787] - [ScreenOS] How to enable and check the OSPF status on NetScreen firewalls
What is the basic configuration to enable OSPF on the vrouter and interface?
Login Required Source: Knowledge Base
CMS-XML[KB21819] - VIP or MIP option not seen on ADSL interface in WebUI
When using WebUI to configure a VIP or MIP for the ADSL interface, the option does not show up. Only basic , IGMP , and monitor are present.
By Technology: Security Products ISG/NS/SSG Series SSG Series SSG 20
Login Required Source: Knowledge Base
CMS-XML[kb22802] - [ScreenOS] 'packet dropped,require full tcp-proxy, can't create session in the middle. Send RST' error message
being generated in the output of debug flow basic , when the firewall is in the transparent mode for TCP protocols.
Login Required Source: Knowledge Base
CMS-XML[KB16553] - SRX Getting Started - Configure Security Policies
Security policies enforce a set of rules for transit traffic, identifying which traffic can pass through the firewall and the actions taken on the traffic as it passes through the firewall. The technical documentation at https://www.juniper.net/techpubs/en_US/junos12.1x44/information-products/pathway-pages/security/security- basic -policy.html addresses the following topics on security policies:
Login Required Source: Knowledge Base
CMS-XML[kb11208] - How to configure synchronous serial interface with Frame Relay encapsulation in SSG devices?
The example provided is based on a connection between ssg20 and ssg350m according to the diagram below. It s a basic example using the configuration defaults whenever possible. X.21 interfaces are used.
By Technology: Security Products ISG/NS/SSG Series SSG Series SSG 20
Login Required Source: Knowledge Base
CMS-XML[KB11165] - Unable to pass traffic between SSG and M7 router when configured for Multilink PPP
Following is the SSG debug output (debug flow basic , snoop, and debug ppp
Login Required Source: Knowledge Base
CMS-XML[KB19962] - [ScreenOS] The firewall not responding to the DHCP request that is sent by a DHCP Relay Agent
From an DHCP Relay Agent as an unicast on UDP port 67. The ScreenOS firewall works correctly in scenario 1; but will not work in scenario 2. The following message is reported in the output of debug flow basic ipid = 8475(211b), @2d57f910
Login Required Source: Knowledge Base
CMS-XML[KB7816] - IPSec Passthrough Fails due to UDP Error Length
The tlen=len+20. In this scenario, 100 != 82+20. When this happens, you will see the err udp length message in the debug flow basic .
Login Required Source: Knowledge Base
CMS-XML[KB5933] - Need to monitor devices on other side of VPN
Configure the basic parameters for Phase 1. Then, click Advanced
Login Required Source: Knowledge Base
CMS-XML[kb20885] - How to prevent TCP Split Handshake Attack on ScreenOS
Enable the strict SYN check: YES ... After configuring the strick SYN check, the output of debug flow basic will show Strict TCP-SYN-Check drop the packet: message.
By Technology: Security Products ISG/NS/SSG Series SSG Series SSG 20
Login Required Source: Knowledge Base
CMS-XML[kb10530] - Configuring serial connection between Juniper Firewall and a Cisco router using PPP encapsulation
, then the Physical link is up but the protocol link is down, so check the following: 1) Basic PPP configuration on the ssg20: set int s1/0 encap ppp
By Technology: Security Products ISG/NS/SSG Series SSG Series SSG 20
Login Required Source: Knowledge Base
CMS-XML[KB15272] - How to create route based dial-up VPN using the same IKE ID (ScreenOS 6.0 and later)
nopfs-esp-3des-sha The basic steps in deploying this configuration are as follows: Note:
Login Required Source: Knowledge Base
CMS-XML[KB28674] - [ScreenOS] Why is it necessary to specify 'Gateway IP address for Next Hop' during the configuration of static default route?
For testing purpose, continuous ping to global DNS server 4.2.2.2 is initiated but all the pings are unsuccessful. During troubleshooting, the command debug flow basic gives an insight into the packet flow and the reason for ping failure.
Login Required Source: Knowledge Base
CMS-XML[KB14883] - How To: Create Multiple Dial Up VPN using same IKE ID (ScreenOS 6.0 and later)
nopfs-esp-3des-sha The basic steps in deploying this configuration is as follows: ScreenOS Firewall Side:
Login Required Source: Knowledge Base
CMS-XML[KB6713] - How To: Configure SSH V2 Management on Juniper Firewall
ns- set int int name manage ssh Basic SSH Configuration Example in Technical Documentation ScreenOS Concepts Examples ScreenOS Reference Guide, Volume 3: Administration
Login Required Source: Knowledge Base
Pages: [Next ]
Redirecting...
 
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.