Knowledge Center - Search

×
Login for secure content  Login Required | Search Tips
Select  at least  one Content Source:  [All | None]
Knowledge Base Technical Documentation
Technotes Security Advisories
J-Net Forums(solved items) Technical Bulletins Login Required
Include Archived Items
 
Searched for: config

RESULTS:

Pages: [ Next ]
CMS-XML[KB27844] - [WLC] How to use the auto-config function
[WLC] How to use the auto- config function
By Technology: Wireless Products WLC Series WLC2
Login Required Source: Knowledge Base
CMS-XML[KB24438] - [WLA/WLC/WLM] Error generated when configuring the bridge via the WLC CLI
profile: Set radio-profile Bridge-rp Set radio-profile Bridge-rp auto-tune channel- config disable Bridging requires auto-tune channel config
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20284] - [WLC] How do I configure and manage Mobility Domains
Displaying the Mobility Domain Configuration To view the configuration of the Mobility Domain, use the show mobility-domain config command on either the seed or a nonseed member. To view Mobility Domain configuration on the seed: MX-20#show mobility-domain config
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20177] - [WLC] How Do I Configure and Manage VLANs
To display VLAN configuration information, use the following command: show vlan config [vlan-id] To display information for VLAN burgundy, type the following command:
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[KB26993] - [WLC] How to downgrade a WLC cluster from CLI
Whenever a WLC is upgraded, the system creates a backup file for the configuration. Some examples of this are config _7_3.bak
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[KB25945] - [WLC] How to configure and use Net-SNMP (Ubuntu)
) to a directory that can be found by the SNMP tool. You can check the default MIBs directory by using the following command: net-snmp- config --default-mibdirs /home/rep/.snmp/mibs:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20295] - [WLC] How do I change and lock down RF Auto-Tuning settings
set radio-profile profile-name auto-tune channel- config {enable | disable} [ignore-clients] The ignore-clients
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20378] - [WLC] How do I resolve common MX Setup Problems
To resolve the second issue, type the show vlan config command to check the status of each VLAN. OR,
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20224] - [WLC]How do I display RF Auto-Tuning information
To display the RF Auto-Tuning settings that you can configure on an individual radio, use the following commands: show ap config [apnumber [radio {1 | 2}]] To display the RF Auto-Tuning and other individual radio settings on both radios on the MP access point configured on connection 1, type the following command:
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20477] - [WLC] What is Mesh and Bridging?
The following commands are used for pre-configuring the Mesh AP: set ap num boot- config mesh mode enable | disable [ssid ssid ] set ap num boot-config mesh [psk-phrase pass-phrase ]|
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20155] - [WLC] How do I manage files on the MX
To display the configuration on the MX, use the following command: MX# show config [area area | all] The area parameter limits the display to a specific configuration area such as a VLAN.
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20392] - [WLC] LA-200 Auto AP Fingerprinting Script
1. 1. While this script would typically be used during the setup phase of an LA-200 1. deployment, AP fingerprints should be recorded after the MX config has been
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20391] - [WLC] LA-200 Calibration Script
1. is running MSS = 6.0. The cli version of the snoop config commands:
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20280] - [WLC] How do I display log entries in the log buffer
DNSD CONFIG BACKUP
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20147] - [WLC] How do I add 3rd party certificates to my MX
Use the following commands: MX# save config MX# reset system
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[KB28428] - [WLC] WLC and ACS configuration
[WLC] WLC and ACS configuration
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20338] - [WLC] Troubleshooting Web Portal Configurations
[WLC] Troubleshooting Web Portal Configurations
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20272] - [WLC] How Do I Configure WEP
[WLC] How Do I Configure WEP
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20246] - [WLC] How do I Configure SNMP
[WLC] How do I Configure SNMP
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
CMS-XML[kb20291] - [WLC] How do I configure Network Domains
[WLC] How do I configure Network Domains
By Technology: Wireless Products WLC Series
Login Required Source: Knowledge Base
Pages: [Next ]
Redirecting...
 
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.