Knowledge Center - Search

×
Login for secure content  Login Required | Search Tips
Select  at least  one Content Source:  [All | None]
Knowledge Base Technical Documentation
Technotes Security Advisories
J-Net Forums(solved items) Technical Bulletins Login Required
Include Archived Items
 
Searched for: fpc

RESULTS:

Pages: [ Next ]
DiscussionPIM/PIC/FPC explanation.. - J-Net Community
PIM/PIC/ FPC explanation..
By Technology: Security Products UAC Series
http://forums.juniper.net/t5/Junos-and-Junosphere/PIM-PIC-FPC-explanation/m-p/26118//true
DiscussionRe: PIM/PIC/FPC explanation.. - J-Net Community
Re: PIM/PIC/ FPC explanation..
By Technology: Security Products UAC Series
http://forums.juniper.net/t5/Junos-and-Junosphere/PIM-PIC-FPC-explanation/m-p/26122//true
DiscussionPIM/PIC/FPC explanation.. - J-Net Community
Can someone breakdown the relationship between PIMs/PICs, and FPCs for me? I've worked with Cisco
By Technology: Security Products UAC Series
http://forums.juniper.net/t5/Junos/PIM-PIC-FPC-explanation/m-p/26118//true#U26118
DiscussionUpgrade bank is empty or corrupted for FPC 0, plea... - J-Net Community
Upgrade bank is empty or corrupted for FPC 0, plea...
By Technology: Switch Products EX Series EX3200
http://forums.juniper.net/t5/Junos-and-Junosphere/Upgrade-bank-is-empty-or-corrupted-for-FPC-0-please-do-standard/m-p/15...
DiscussionRe: Upgrade bank is empty or corrupted for FPC 0, ... - J-Net Community
Re: Upgrade bank is empty or corrupted for FPC 0, ...
By Technology: Switch Products EX Series EX3200
http://forums.juniper.net/t5/Junos-and-Junosphere/Upgrade-bank-is-empty-or-corrupted-for-FPC-0-please-do-standard/m-p/15...
Discussionport-mirroring questions - J-Net Community
i know that port-miorring instnaces could be bound at FPC level or PIC level. at FPC level:
By Technology: Switch Products EX Series EX3200
http://forums.juniper.net/t5/Junos/port-mirroring-questions/m-p/85696//true#U85696
DiscussionThird VC member is inactive - J-Net Community
Member ID Status Serial No Model priority Role ID Interface 0 ( FPC 0) Prsnt bm02090xxxxx ex4200-24t 255 Master* 2 vcp-255/1/1 1 vcp-255/1/3
By Technology: Switch Products EX Series EX4200
http://forums.juniper.net/t5/Ethernet-Switching/Third-VC-member-is-inactive/m-p/21593//true#U21593
HTMLPower Entry Module - J-Net Community
Power Entry Module My EX-3200 is generating about " FPC 0 PEM 0" failure message ... What does it indicate, as all my services are running fine on that switch ...
By Technology: Switch Products EX Series EX4200
http://forums.juniper.net/t5/Ethernet-Switching/Power-Entry-Module/m-p/72494//true
HTMLex8200 series interface number - J-Net Community
ex8200 series interface number I've been studying ex3200 and ex4200 so that i understood those interfaces numbers. MM- FPC /PIC/PORTs
By Technology: Switch Products EX Series EX4200
http://forums.juniper.net/t5/Ethernet-Switching/EX8200-series-interface-number/m-p/27582//true
DiscussionConfigure Dual-Port Channelized T1/E1/ISDN PRI PIM... - J-Net Community
9.0r1.10 FPC 2 REV 07 750-014337 nz1750 FPC PIC 0 2x CT1E1 / PRI
By Technology: Switch Products EX Series EX4200
http://forums.juniper.net/t5/Junos/Configure-Dual-Port-Channelized-T1-E1-ISDN-PRI-PIM-on-J2320/m-p/44893//true#U44893
HTMLHigh utilization - J-Net Community
High utilization How to check what is causing high utilization on SRX (branch)? I have lots of "PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC 0 CPU utilization exceeds threshold" in the log and no idea what is causing them...
By Technology: Security Products SRX series
http://forums.juniper.net/t5/SRX-Services-Gateway/High-utilization/m-p/76054//true
HTMLXFP configuration - J-Net Community
XFP configuration After the install and reboot, the switches do show FPC 0 PIC 1 online, but I have been unable to find a configuration guide for these. These interfaces do not show up in operational mode (show interface terse) but ge-0/1/0 -3 are show in config mode (show interface ?) Any help would be highly appreciated.
By Technology: Security Products SRX series
http://forums.juniper.net/t5/Ethernet-Switching/XFP-configuration/m-p/33263//true
HTMLboot-script - J-Net Community
boot-script commands { "request chassis pic fpc -slot 0 pic-slot 1 offline"; "request chassis pic fpc-slot 0 pic-slot 1 online";
By Technology: Security Products SRX series
http://forums.juniper.net/t5/Junos-and-Junosphere/boot-script/m-p/21231//true
HTMLCan you configure interfaces that do not yet exist... - J-Net Community
Can you configure interfaces that do not yet exist? root@router1# set ge-9/0/0 fpc value outside range 0..6 for '9/0/0' in 'ge-9/0/0'. Solved! Go to Solution.
By Technology: Security Products SRX series
http://forums.juniper.net/t5/Routing/Can-you-configure-interfaces-that-do-not-yet-exist/m-p/34055//true
HTMLm20 /JunOS 6.4/NAT problem! Please Help! - J-Net Community
m20 /JunOS 6.4/NAT problem! Please Help! Here is the config in bri ps:I still a little uncertian about the services interface sp- fpc /pic/* ,what's it really mean, I think i was a little "ciscoer". ~~~~~~~~~~~~~~~~~~~~~~~~~~ interfaces {
By Technology: Security Products SRX series
http://forums.juniper.net/t5/Junos-and-Junosphere/M20-JunOS-6-4-NAT-problem-Please-Help/m-p/3026//true
HTMLHow much memory j4350 maximum support? - J-Net Community
How much memory j4350 maximum support? ad0 244 MB 256MB CHH 507433c29a42370020 Compact Flash FPC 0 FPC
By Technology: Security Products UAC Series
http://forums.juniper.net/t5/Routing/How-much-memory-J4350-maximum-support/m-p/30441//true
HTMLsrx210 ADSL/G.shdsl pinouts - J-Net Community
srx210 ADSL/G.shdsl pinouts My setup is <G.SHDSL>RJ45---2wire----RJ11<media filter>--<telephone socket/line> I do not have the official Juniper RJ45 to RJ11 cable, so i am trying to make my own, however I am not sure what the pinouts should be and also if i need to change the "set chassis fpc 1 pic 0 shdsl pic-mode" from 8 wire to something else...
By Technology: Security Products SRX series SRX 210
http://forums.juniper.net/t5/SRX-Services-Gateway/SRX210-ADSL-G-shdsl-pinouts/m-p/146344//true
DiscussionPOS interface on m120 FE PIC - J-Net Community
It sounds like you are confusing POS (Packet over SONET), with optical interface for FastEthernet (100base-FX). Juniper sells one optical FastEthernet PIC for the m120 (type1 FPC ).
By Technology: Security Products SRX series SRX 210
http://forums.juniper.net/t5/Routing/POS-interface-on-M120-FE-PIC/m-p/27941//true#U28072
HTMLRe: HIGH Availability SRX 650 - Page 2 - J-Net Community
Re: HIGH Availability SRX 650 yep, as I said, that numbering is probably off and depends on the actual number of present interfaces. one of my srx650 clusters starts at ge-9/0 and the first FPC starts at ge-11/0. ge-7 is probably if you don't have any FPC slots occupied?
By Technology: Security Products SRX series SRX 650
http://forums.juniper.net/t5/SRX-Services-Gateway/HIGH-Availability-SRX-650/m-p/127903//true
HTMLConfigure Dual-Port Channelized T1/E1/ISDN PRI PIM... - J-Net Community
Configure Dual-Port Channelized T1/E1/ISDN PRI PIM on j2320 9.0r1.10 FPC 2 REV 07 750-014337 nz1750 FPC PIC 0 2x CT1E1 / PRI
By Technology: Security Products SRX series SRX 650
http://forums.juniper.net/t5/Junos-and-Junosphere/Configure-Dual-Port-Channelized-T1-E1-ISDN-PRI-PIM-on-J2320/m-p/44893/...
Pages: [Next ]
Redirecting...
 
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.