Knowledge Center Search


 

Network Time Protocol Server (NTP) support on Juniper firewalls

  [KB12609] Show KB Properties

  [KB12609] Hide KB Properties

Categories:
Knowledge Base ID: KB12609
Last Updated: 11 Aug 2010
Version: 2.0

Summary:
Can a Juniper firewall work as an NTP server for their clients in Nat/Route and Transparent Mode?

Problem or Goal:

Solution:
In ScreenOS 6.0 and above, the Juniper firewall can be the NTP server.  Note that this new feature is supported in NAT/Route mode, but not in Transparent Mode.

Configuration - CLI
To enable/disable the NTP server, enter the commands:
set interface <if_name> ntp-server
unset interface <if_name> ntp-server
Example 
set interface eth0/0 zone trust
set interface eth0/0 ip 10.1.1.1/24
set interface eth0/0 ntp-server


For more information, please refer to the ScreenOS 6.0 Release Notes.


Related Links:

 

 

ASK THE KB

Question or KB ID:


 


 

 
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.