How Do I Check the Phase 2 Proposals on Both Sides of a VPN? (KB ID: KB4407)
| Article ID: | KB4407 |
|---|---|
| Former Article ID: | ns10469 |
| Published: | Feb 10, 2006 |
| Last Modified: | Feb 10, 2006 |
| Visible By: | Employee, PTAC, Partner, Customer, Public |
Back to Previous Page | Knowledge Base Home
Article URL
Synopsis
How Do I Check the Phase 2 Proposals on Both Sides of a VPN?
Problem
Solution
This article applies to ScreenOS 4.0 and higher.
To check the phase 2 proposals on both sides, perform the following steps:
Open the WebUI. For more information on accessing the WebUI, go to Accessing Your NetScreen Using the WebUI. 
From the NetScreen options menu, click VPNs, and then click AutoKey IKE.
Locate the VPN, and then click Edit.
Click Advanced.
Verify the Phase 2 Proposal settings.
Connect to the other NetScreen device, and repeat Step 2 through Step 5. Configure the Phase 2 proposal to match the settings of the first NetScreen device. Category Description
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5GT
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5XP
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5XT
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-25
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-50
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-204 (EOL)
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-208 (EOL)
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5200
By Product » Hardware » Firewalls » NetScreen Firewall/IPSec VPN » NetScreen-5400
By Product » Software » Network Operating Systems » ScreenOS Software
By Network Technology » IP Protocols » Tunneling Protocols » IPSec
Purpose
Troubleshooting