Juniper Networks - How Do I Enable Ping Management on the Trusted Interface?

This article applies to ScreenOS 4.0 and higher.

For VPN troubleshooting, enable ping management for both firewalls.

To enable ping management on the trusted interface, perform the following steps:

Open the WebUI. For more information on accessing the WebUI, go to Accessing Your NetScreen Using the WebUI.

From the NetScreen options menu, click Network, and then click Interfaces.

Image of step two

Locate the ethernet1 interface, and then click Edit.

Image of step three

From Service Options, click to select Ping.

Image of step four and five

Click OK.

Knowledge Base ID:	KB4410
Version:	3.0
Published:	07 Oct 2008
Updated:	07 Oct 2008
Categories:	NS-5GT NS-5XP NS-5XT NS-25 NS-50 NS-204 NS-208 NS-5200 NS-5400 Management (Admin)