Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

How to perform initial switch configuration using EZsetup via CLI for the EX-series switch

0

0

Article ID: KB10908 KB Last Updated: 05 Mar 2017Version: 5.0
Summary:
JUNOS for EX-series switches come with an EZsetup initial configuration wizard to help get your switch operational quickly. EZsetup automates the initial configuration by presenting a series of basic initial configuration options such as the management IP address, root password, system time settings, and management VLAN settings. The EZsetup wizard is available in both a J-Web GUI version and a CLI-based version. The information below describes the step to run EZsetup over CLI.
Symptoms:

Solution:

Initial Switch Configuration Using CLI

To configure the switch:

  1. Connect the console port to a laptop or PC using the RJ-45 to DB-9 serial port adapter. The RJ-45 cable and RJ-45 to DB-9 serial port adapter are supplied with the switch.

  2. At the prompt type ezsetup.

  3. Enter the hostname.

  4. Enter the root password. You are prompted to re-enter the root password.

  5. Enter yes to enable services like telnet and SSH.

  6. Next, select one of the switch management options:

  7. Manage the switch using the default VLAN. In this scenario all data ports are configured as members of the default VLAN. Specify the management and gateway address for the default VLAN. This IP address is used to connect to the switch.

  8. Manage the switch using the management port. Specify the IP address and gateway of the management interface. Use this IP address to connect to the switch.

  9. Specify the SNMP Read Community, Location, and Contact to configure SNMP parameters. These parameters are optional.

  10. Specify the system date and time. Select the time zone from the list.

The configured parameters are displayed. Enter yes to save the configuration.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search