Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] HA LED remains green in Backup with "set nsrp rto-mirror session non-vsi"



Article ID: KB11089 KB Last Updated: 09 Sep 2019Version: 4.0
HA LED remains green on the backup firewall after a failover.
Once  the command, set nsrp rto-mirror session non-vsi, is enabled on the firewalls in a NSRP Active/Backup configuration, the HA LED remains green after a failover.
This is expected behavior.  The set nsrp rto-mirror session non-vsi command is used for an Active/Active NSRP environment.

This command forces the devices to sync non-vsi interfaces sessions and will change the active/passive scenario to an active/active scenario.   This is why the steady green HA LED is shown on both the devices.

To restore the correct HA LED behavior, do either of the following:
  • Remove this command, unset nsrp rto-mirror session non-vsi , and restart the device.
  • Run the commands on the backup firewall. The HA LED will behave as normal active-backup mode.
    unset nsrp cluster id
    set nsrp cluster id <cluster id>
Modification History:
2019-08-26: Article reviewed for accuracy.  No changes.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search