Knowledge Search


×
 

The firewall cannot upgrade the boot loader image with ### invalid system image ###

  [KB11235] Show Article Properties


Summary:
How do you upgrade the bootloader?
Symptoms:
Customer is attempting to upgrade the bootloader image, but it fails.  The message '### invalid system image ###' is reported as shown below.  Note that the customer is entering the bootloader image name, boot2.v.1.0.3, at the 'Firmware File Name' prompt.
ScreenOS Saipanloader V1.0.2
Built Jan 19 2006/17:57:03
watchdog_probe, 1046 bus/dev/fn = 0/248 ich = 2640
boot_drive = 80
start1 = 0768, start2 = 3840 

Hit 'X' and 'A' to upgrade bootloader
mounting FAT16 partition
file size = 112
size = 112, sizeof(nvram_rec) = 112

Hit any key to load new firmware
Hit any key to load new firmware
Hit any key to load new firmware

Serial Number [                ]: READ ONLY
BOM Version Number [   ]: READ ONLY
Self MAC Address [0000-0000-0000]: READ ONLY
ip = 192.168.160.5 svr = 192.168.160.186
self_ip_buf = 192.168.160.5, tftp_ip_buf = 192.168.160.186

Firmware File Name [ssg500.5.4.0r8.0]: boot2.v.1.0.3   <------------------

Self IP Address [192.168.160.5]:
TFTP IP Address [192.168.160.186]: 
Save loader config (112 bytes)... saving config to disk

file /config.bin size was 112
Done
saving config to disk
file  size was 0
can't find

Saipan motherboard proto 3 or later detected
Probing...[Ethernet0/0 and Ethernet0/1]

Initiating hardware and waiting for link up ...
self_ip = 192.168.160.5, tftp_server_ip = 192.168.160.186
ip = 192.168.160.5 mask = 255.0.0.0 gw = 0.0.0.0 svr = 192.168.160.186
network_ready = 1
boot2.v.1.0.3
offset = 0, maxposition = 119959
119959 bytes downloaded from tftp server
hdr->magic_number = bdbe5652, hdr->platform_type = e880, hdr->cpu_type = 235

### invalid system image ###       <--------------------

Hit any key to load new firmware
Hit any key to load new firmware
Hit any key to load new firmware
Hit any key to load new firmware/$nsboot$.bin
file size = 9558767
Solution:
This issue occurred because the firewall boot process was interrupted at the 'firmware' loader prompt, i.e. 'Hit any key to load new firmware' message.  This is an incorrect action for upgrading the bootloader.

In order to upgrade the bootloader, press the X and A keys (Shift-x, Shift-a) sequentially, when the message 'Hit 'X' and 'A' to upgrade bootloader' is reported:
ScreenOS Saipanloader V1.0.2
Built Jan 19 2006/17:57:03
watchdog_probe, 1046 bus/dev/fn = 0/248 ich = 2640
boot_drive = 80
start1 = 0768, start2 = 3840 

Hit 'X' and 'A' to upgrade bootloader   <-------------
mounting FAT16 partition
Related Links: