Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[STRM] How to configure Juniper ScreenOS Firewall to send Syslogs to STRM



Article ID: KB12426 KB Last Updated: 04 Aug 2014Version: 5.0

This article describes how to configure the Juniper ScreenOS Firewall to send Syslogs to the STRM.




A Juniper firewall is auto-detected by the STRM; no configuration is necessary on the STRM.

Configuring a Juniper firewall from the CLI

  1. Log into the CLI.

  2. Enter the commands below (the IP Address of the STRM is assumed to be

set syslog config ""
set syslog config "" facilities local0 local0
set syslog config "" log traffic
set syslog enable

Configuring a Juniper firewall from the Web UI

  1. Log into the Web UI.

  2. Go to Configuration > Report Settings > Syslog.

  3. Select Enable syslog messages and enter the associated information (see sample below).

Syslog from WebUI

Configuring a Juniper firewall from NSM

  1. Edit the device in NSM.

  2. Go to Report Settings > Syslog.

  3. Add the syslog configuration as shown below.

Syslog from NSM

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search