Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] SNMPwalk queries of 64-bit counters on the firewall are not returning any values



Article ID: KB12545 KB Last Updated: 17 Jun 2010Version: 2.0
Why, when running an SNMP walk, do I not see the 64-bit counters from the firewall?
If you attempt to perform an SNMP walk and you find that you can’t see the 64-bit counters, you’re most likely using SNMP v1 (version 1), or possibly an unsupported version of SNMP (like version 3, which is unsupported). The only two supported versions of SNMP are v1 and v2c.
You have to use SNMP v2c in order to get the 64-bit counters to report properly. They will not work using v1.

Also, make sure the ScreenOS version is 5.3.0 or greater.

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search