Support Support Downloads Knowledge Base Apex Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

Network Time Protocol Server (NTP) support on Juniper firewalls

0

0

Article ID: KB12609 KB Last Updated: 03 Jan 2017Version: 3.0
Summary:
Can a Juniper firewall work as an NTP server for their clients in NAT/Route and Transparent Mode?
Solution:
In ScreenOS 6.0 and above, the Juniper firewall can be the NTP server.  Note that this new feature is supported in NAT/Route mode.  In transperant mode, the device can work as NTP client but not as an NTP server

Configuration - CLI
To enable/disable the NTP server, enter the commands:
set interface <if_name> ntp-server
unset interface <if_name> ntp-server
Example 
set interface eth0/0 zone trust
set interface eth0/0 ip 10.1.1.1/24
set interface eth0/0 ntp-server


For more information, please refer to the ScreenOS 6.0 Release Notes.


Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search