Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[MX] Setting up an MX-Series node for use as an RP or source DR in a PIM Sparse-Mode network

0

0

Article ID: KB13329 KB Last Updated: 07 May 2020Version: 2.0
Summary:

Sparse-Mode Protocol Independent Multicast (PIM) requires a Rendezvous Point (RP) to function. An MX Series node can be set up as an RP or a Designated Router (DR) by setting one of its interfaces to tunnel mode.

This article explains how is done.

 

Symptoms:

In the PIM Sparse-Mode implementation, the source Designated Router (DR) takes the initial multicast packets and encapsulates them into PIM register messages. It then unicasts them to the PIM Sparse-Mode RP router, where the PIM register messages are de-encapsulated.

On Juniper Networks routers, data packets are encapsulated and de-encapsulated into tunnels by means of hardware and not the software running on the router's processor. The hardware that is used to create tunnel interfaces is a Tunnel Services Physical Interface Card (PIC). All RP routers and IP version 4 (IPv4) PIM Sparse-Mode DRs that are connected to a multicast source require a Tunnel Services PIC.

 

Solution:

To enable tunnel interfaces on an MX Series node, include the tunnel-services statement at the [edit chassis fpc slot-number pic number] hierarchy level. To configure the bandwidth for a tunnel interface, include the bandwidth statement at the [edit chassis fpc slot-number pic number] hierarchy level.

The following example shows a tunnel interface with 1 Gbps of bandwidth configured on PFE 1 of the Dense Port Concentrator (DPC) installed in slot 4 of an MX Series node:

chassis }
    fpc 4;
    pic 1 {
        tunnel services {
            bandwidth 1g;
        }
    }
}

 

Modification History:

2020-05-07: Updated links in the article and check its content for accuracy; article relevant and valid

 

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search