Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

Is IPv6 supported on ScreenOS in transparent mode?

0

0

Article ID: KB13443 KB Last Updated: 26 Feb 2009Version: 1.0
Summary:

Is IPv6 supported on ScreenOS in transparent mode?

Symptoms:

IPv6 was enabled on a firewall device running ScreenOS 6.1.0.  The following messages were reported in the 'debug flow basic' output:

Interface <ethernet2/1> IPv6 disabled, treat it as unknown traffic.
Interface <mgt> IPv6 disabled, drop IPv6 packet.

Solution:

Upgrade to ScreenOS 6.2 for the following new feature:

Transparent Mode for IPv6—ScreenOS now supports IPv6 addressing and functionality on security devices in transparent mode. This feature adds support for three new kinds of VPNs: IPv4 over IPv6 IPsec, IPv6 over IPv4 IPsec and IPv6 over IPv6 IPsec. Device management is also permitted in IPv6 mode.

Also, refer to the Release Notes for ScreenOS 6.2: www.juniper.net/techpubs/software/screenos/screenos6.2.0
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search