Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[STRM] Reinstall STRM 2008.3 and above



Article ID: KB13961 KB Last Updated: 17 Jun 2011Version: 2.0
STRM 2008.3 and above can be reinstalled by restoring the device to Factory defaults. This is done by booting the device into recovery partition during boot process
How to reset STRM 2008.3 and above to factory defaults
This KB assumes you already have recovery partition installed on the system.   If you do not have recovery partition configured  you can install it using the steps in KB13960

To restore the device to factory defaults:
  1. Connect via the console and reboot the device. 
  2. During the boot up process, select "factory re-install" option as shown below

  3. Once you select the Factory re-install option,  STRM will initialize and a screen similar to that below - type "flatten" at this prompt to continue

  4. STRM will now be restored to the base 2008.3 version.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search