Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] What features are not supported in Chassis Cluster on high-end SRX Series security gateway?

0

0

Article ID: KB14371 KB Last Updated: 04 Mar 2017Version: 3.0
Summary:
This article provides information about the features that are not supported in the Chassis Cluster on the high-end SRX series security gateway.
Symptoms:
Unsupported features in the Chassis Cluster on the high-end SRX Series security gateway.
Cause:
 
Solution:

Junos Release                     Feature Not Supported
9.4


  • IPSEC VPN

  • Active/Active configuration
9.5

  • Multicast traffic streams are not supported on SRX-series chassis clusters.

  • For SRX 3000 and SRX 5000 line chassis clusters, screen statistics data can be gathered on the primary device only.

  • Remote-Access VPN using NS-Remote client is not supported on SRX 3400, SRX 3600, SRX 5600, and SRX 5800 chassis clusters. It is supported in standalone mode. 

  • IDP feature is not supported in Active/Active chassis clustering

  • Packet-based protocols. All packet-based protocols, such as Multiprotocol Label Switching (MPLS), Connectionless Network Service(CLNS), and IP version 6 (IPv6) Services interfaces functions.

  • Any function that depends on the configurable services interfaces as below:

    • ls-0/0/0-Link services Multilink Point-to-Point Protocol (MLPPP)

    • Multilink Frame Relay (MLFR)

    • Compressed Real-Time Transport Protocol (CRTP)

    • gr-0/0/0-Generic routing encapsulation (GRE) and tunneling

    • ip-0/0/0-IP-over-IP (IP-IP) encapsulation pd-0/0/0, pe/0/0/0,

    • mt-0/0/0-All multicast protocols

    • lt-0/0/0-Real-time performance monitoring (RPM)


For more information on Junos 9.4, refer to the Release Notes at the following link:

www.juniper.net/techpubs/en_US/junos9.4/information-products/topic-collections/release-notes/9.4/frameset.html


For more information on Junos 9.5, refer to the Release Notes at the following link:

www.juniper.net/techpubs/en_US/junos9.5/information-products/topic-collections/release-notes/9.5/frameset.html


Notes:

  • The Active/Active configuration can have more than one interface Redundancy-group on a chassis cluster.

  • High-end SRX includes SRX-5800, SRX-5600, SRX-3600 and SRX-3400.

  • The Features, which are not supported in JUNOS 9.5, are also not supported in JUNOS 9.4.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search