Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] SNMP traps are not being sent from the firewall



Article ID: KB14453 KB Last Updated: 07 Aug 2011Version: 3.0
Not seeing SNMP traps. Traps are not being sent

SNMP traps can be sent for Emergency, Alert and Critical level events. In order for the SNMP traps to be sent, check that the following are all configured:
  • A SNMP community must be set up.
    See KB4714 for more information about Setting up SNMP Management.

  • SNMP must be enabled on the interface
  • See KB4118 for more information.

  • The level of alert needs to be selected to be sent. To check which level of events are set to send traps do the following:

    1. Click Configuration
    2. Click Report Settings
    3. Click Log Settings
    a. Click the level of events next to SNMP that are to send traps.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search