Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[EOL/EOE] [NSM] How to set up Extended HA

0

0

Article ID: KB14716 KB Last Updated: 18 Oct 2020Version: 3.0
Summary:
Note: A product listed in this article has either reached hardware End of Life (EOL) OR software End of Engineering (EOE).  Refer to End of Life Products & Milestones for the EOL, EOE, and End of Support (EOS) dates.
What is the procedure to set up Extended HA in NSM?
Symptoms:
I need to set up Extended HA for NSM. What is a basic procedure that I should follow?
Solution:
The procedure is as below:

Install all 4 servers, but do not start the processes

Start the HA Server on the system that has the Primary GUI Server Installed. A way to do this is with the command: /etc/init.d/haSvr start
  • Wait until the GUI Server comes up and login using the GUI
  • Add the Device Server
  • Change the Device Server to Device Cluster and define the IP Address for the Secondary Server
Start the HA server process on the Primary Device Server

Confirm that the Device Server is shown as OK and the peer state is shown as timed-out in the GUI client

Start the HA Server processes on the Secondary GUI Server and Secondary Device Server

Wait for replication on Primary GUI Server and Primary Device Server to complete for NSM 2007.2 and higher. Perform a failover of both the GUI Server and Device Server by stopping the HA server process on the Primary GUI and Primary Device Server
  • The command /etc/init.d/haSvr stop will stop the HA server processes
Confirm, via the GUI, that the status shows the Secondary Servers are active

Start the HA Server process on the Primary GUI Server and Primary Device Server. A way to do this is with the command: /etc/init.d/haSvr start


After the above steps, test the cross connectivity.  Refer to the NSM Install Guide for further information.

For HA troubleshooting assistance, consult: http://kb.juniper.net/KB11264
Modification History:
2020-10-18: Tagged article for EOL/EOE.
 
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search