Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[EOL/EOE] Configuring VLANs on EX-series switches with Network and Security Manager (NSM)

0

0

Article ID: KB15020 KB Last Updated: 18 Oct 2020Version: 2.0
Summary:
Note: A product listed in this article has either reached hardware End of Life (EOL) OR software End of Engineering (EOE).  Refer to End of Life Products & Milestones for the EOL, EOE, and End of Support (EOS) dates.
EX-series switches use bridging and virtual LANs (VLANs) to connect network devices in a LAN—desktop computers, IP telephones, printers, file servers, wireless access points, and others—and to segment the LAN into smaller bridging domains.
Solution:

To configure a VLAN:

  • In the navigation tree, select Device Manager > Devices. In Device Manager,select the device for which you want to configure VLANs.



  • In the Configuration tree, expand Vlans.



  • Select Vlan.
 
  • In the VLAN screen, click the add or edit icon.



  • Add/modify VLAN settings

VLAN can be moddified as specified in the Table below VLAN Edit Settings table:

Option

Description

Action

Vlan Name

Specifies a unique name for the VLAN

Enter a name

Description

Describes the VLAN

Enter a brief description for the VLAN

Vlan ID

The identifier for the VLAN

Type a unique identification number from 1 through 4094. If no value is specified, it defaults to 0

L3 Interface

Specifies the Layer 3 interface on trunk ports to Type the L3 interface.
Allow the interface to transfer traffic between multiple VLANs

Type the L3 interface

Mac Limit

Specifies the MAC address limit

Select a value from the list

Mac Table Aging Time

Specifies the maximum time that an entry can remain in the forwarding table before it 'ages out'.

Type the number of seconds from 60 through 1000000

Filter

Specifies the VLAN firewall filter that is applied to incoming and outgoing packets.

To specify an input and output filter:

  1. Click Filter.
  2. Specify the filter to be used for incoming and outgoing packets.
Interface

Specifies the interface to be added to the VLAN.

To add an interface, click Interface.
Specify the interface to be included as part of the VLAN.



Below is how to set VLAN name and ID:

Set VLAN name





set VLAN-ID:


  • Click one:
OK - To save the changes.
Cancel - To cancel the modifications.
 

NOTE:
After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time.

Modification History:
2020-10-18: Tagged article for EOL/EOE.
 
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search