Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

How to troubleshoot GVRP for the EX Switches

0

0

Article ID: KB15174 KB Last Updated: 04 Mar 2017Version: 2.0
Summary:
This purpose of this article is to provide an overview of how to troubleshoot GVRP for the EX series Switch.  It assumes that STP is properly up and running on your system.
Symptoms:

Solution:
Steps for troubleshooting GVRP:

1. Check to see if GVRP is configured by reviewing configuration under protocols stanza:

{master:0}[edit protocols]
root@L5-23-4200# show
igmp-snooping {
vlan all;
}
lldp {
interface all;
}
lldp-med {
interface all;
}
gvrp {
interface ge-0/0/0.0;
}
rstp;

2. Check GVRP timers.  The following values are the default timers for GVRP.  These timers are configurable under the "protocol gvrp" stanza.


[edit protocols]
juniper# run show gvrp timers
GVRP timers (ms)
Join : 200
Leave : 600
LeaveAll : 10000

3. Check GVRP statistics and ensure that the counters are incrementing. 

[edit protocols]
juniper# run show gvrp statistics
GVRP statistics
Join Empty received : 44
Join In received : 0
Empty received : 0
Leave In received : 0
Leave Empty received : 0
LeaveAll received : 1
Join Empty transmitted : 44
Join In transmitted : 0
Empty transmitted : 19
Leave In transmitted : 0
Leave Empty transmitted : 0
LeaveAll transmitted : 42

4.) Check that interfaces appear in GVRP participating vlans


[edit protocols]
juniper# run show vlans 100
Name Tag Interfaces
vlan100 100
ae0.0, ae16.0, ge-0/0/2.0, xe-3/0/0.0*

5. Check to see if the GVRP protocol is sending and receiving on GVRP interface

juniper# run monitor traffic interface xe-3/0/0
verbose output suppressed, use <detail> or <extensive> for full protocol decode
Address resolution is ON. Use <no-resolve> to avoid any reverse lookup delay.
Address resolution timeout is 4s.
Listening on xe-3/0/0, capture size 96 bytes

23:13:29.886463 In GARP message, length 43
23:13:29.987663 Out GARP message, length 9
23:13:30.006455 In GARP message, length 43
23:13:30.127912 In GARP message, length 43

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search