Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] How do I enable IPv6 and what devices are supported?

0

0

Article ID: KB15692 KB Last Updated: 25 May 2019Version: 3.0
Summary:

This article describes how to enable IPv6 on the ScreenOS firewalls, and what devices support IPv6.

Solution:
IPv6 can be enabled only on the CLI, with the following command:

set envar ipv6=yes

After setting this command, the firewall will need to be reset to activate this feature.

To confirm that IPv6 is enabled after the firewall is reset, run the command: 

get envar

You will see a line on the envar output that confirms that IPv6 is enabled:

ipv6=yes

After this option is set, IPv6 addressing, routing and commands will be available to use. Refer to your specific Concepts and Examples ScreenOS Reference Guide: Volume 7, Routing, for more information on configuring IPv6.


Note: IPv6 support was introduced in ScreenOS 5.3 and above.  (Refer to the ScreenOS End-of-Life and the Netscreen Hardware End-of-Life pages for information about discontinued hardware and ScreenOS versions.)
 

Modification History:
2019-05-25: Minor, non-technical edit.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search