Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

How to configure link aggregation group (LAG) on EX-series Ethernet Switches using the Jweb interface

0

0

Article ID: KB16346 KB Last Updated: 19 Feb 2010Version: 1.0
Summary:
IEEE 802.3ad link aggregation enables multiple Ethernet interfaces to be grouped together and form a single link layer interface, also known as a link aggregation group (LAG) or bundle. A typical deployment for LAG would be to aggregate trunk links between an access switch and a distribution switch or customer edge (CE) router. LAG can only be used for a point-to-point connection. The information below describes the steps used to configure link aggregation.
Symptoms:

Solution:
Link aggregation takes place on point-to-point connections between two devices. A LAG balances traffic across the member links within an aggregated Ethernet bundle and effectively increases the uplink bandwidth. Another advantage of link aggregation is increased availability, because the LAG is composed of multiple member links. If one member link fails, the LAG continues to carry traffic over the remaining links.

All links participating in an LAG are considered members. A typical deployment for LAG would be to aggregate trunk links between an access switch and a distribution switch or customer edge (CE) router.

NOTE:  The LAG interface cannot be created using the web-interface without deleting the logical part of the interfaces using the CLI.


In a default switch configuration, the logical interface is configured with the family ethernet-switching as belo
w:

{master:0}[edit interfaces ge-0/0/1]
user@switch# show
unit 0 {
       family ethernet-switching;
}


The first step is to make sure that the logical part of the interface is deleted by issuing the following command and committing the configuration.

{master:0}[edit interfaces ge-0/0/1]
user@switch# delete unit 0

JWEB Configuration:
  1. On the Dashboard click on the Configure tab.
  2. Access the Link aggregation tab on the left menu of the page.
  3. Click on Add present on the right corner of the page which will have a Create Aggregation window displayed.
  4. This window will display only the interfaces for which the logical "unit 0" has been deleted. Click on add and select the interfaces that has to be added to the aggregated interface ae0 which will be the first LAG interface.
  5. LACP mode,either active or passive can be selected from the drop down menu.
  6. If we wish to have logging enabled, we should check the check box to enable the option.
  7. Click OK

The details of the ae0 interface that has been created will be displayed in the pane below the configuration pane as below:

Details of Aggregation: ae0

Administrative Status: Up
Logical Interface : None
Member Interfaces :  ge-0/0/0,ge0/0/1
Port Mode :  -
Native VLAN (VLAN ID) : -



Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search