Knowledge Search


[SRX] Dynamic-VPN using Pulse Secure Client minimum requirements

  [KB17436] Show Article Properties


This article provides information about the minimum requirements for using Dynamic VPN using Pulse Secure Desktop Client


The Pulse Secure Desktop Client is unable to establish a connection to the SRX


It is usually the case that a connection cannot be established because the minimum requirements for the Pulse Secure Desktop Client and the SRX device are not met.

The minimum requirements for the client and the SRX device are listed below. Check to see if your client and SRX device meet the minimum requirements.

SRX Requirements

The Dynamic VPN feature is supported by the following SRX devices and Junos releases:

SRX100, SRX110, SRX210, SRX220, SRX240, SRX650
SRX550 =>Supported from 12.1 and later
SRX 550M => Supported from 15.1x49D60
SRX 300 series => Supported from 15.1x49D60
SRX 1400 series =>  Not supported
SRX 1500 series => Not supported
SRX 3000 series => Not supported
SRX 4000 series=> Not supported
SRX 5000 series => Not supported
The supported platforms are also documented in the Feature Explorer

Pulse Secure Desktop Client Requirements

  • Windows 7 (32-bit and 64-bit)
  • Windows 8.0 (32-bit and 64-bit)
  • Windows 8.1 (32-bit and 64-bit)
  • Windows 10 (32-bit and 64-bit)
  • MAC OS X 10.8 or higher (available with Pulse 5.0R3 or higher)

Pulse Secure Desktop Client Download

Pulse Secure desktop client is available via Juniper downloaded from

SRX License

Dynamic VPN is a licensed feature. By default, a two-user evaluation license is provided (free of charge) on SRX devices and it does not expire. When more than two users have to connect concurrently, a license is required.  For license ordering information, refer to the following datasheet:

If your client and SRX device meet the minimum requirements but you are still having issues establishing a connection, see KB17220 - Resolution Guide - SRX - Troubleshoot Pulse VPN connections to SRX .

Related Links: