Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[WLC] How do I log into WebView?

0

0

Article ID: KB20456 KB Last Updated: 13 Sep 2018Version: 2.0
Summary:

This article describes how to log in to WebView of Wireless Controller (WLC).

Solution:

WebView is the graphical user interface (GUI) for Mobility System Software (MSS).

To login to WebView, the following information is required:

  • IP Address of the WLC

  • Username. The default is admin.

  • Password. The default is blank (no password). If an enable password has been configured on the WLC, use the same password to log in to WebView.

Supported Browsers: Mozilla Firefox version 1.0 or later and Microsoft Internet Explorer version 6.0 or later. Google Chrome and Safari Browsers are not supported.

Supported Platforms: All WLC Models are supported except Virtual Wireless Controller or vWLC.

 

Modification History:

2018-09-13: Minor non-technical edits.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search