Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[EX] How to halt the line cards with single RE on EX8200

0

0

Article ID: KB22241 KB Last Updated: 14 Dec 2011Version: 1.0
Summary:
This article provides information on how to halt the line cards with single RE on EX8200.
Symptoms:
When EX8200 is required to halt, due to some reasons, there are several different ways to accomplish this, as per the version.


Cause:
 
Solution:

Previous version of 10.0R4:

  1. > request chassis fpc offline slot <slot-num>

  2. > request system halt
At first, It needs to halt the line cards.


From version 10.0R4 to 10.4R2:

  1. > request system halt power-off fpc
The power-off fpc command can be used from the following versions:

  10.0R4, 10.1R4, 10.2R3, 10.3R2, 10.4R1, and 11.1R1.


From version 10.4R3 and later:

  1. > request system halt
The line cards will be halted immediately, when the RE is halted. This modification change is available from the following versions:

10.4R3 and 11.1R1

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search