Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] The 'set igmp join-group' and 'unset igmp join-group' commands do not work after upgrading to 6.3

0

0

Article ID: KB24664 KB Last Updated: 18 Jul 2012Version: 1.0
Summary:
This article describes the issue of the set igmp join-group and unset igmp join-group commands not working, after an upgrade to ScreenOS 6.3.
Symptoms:
After upgrading to ScreenOS 6.3, when the set igmp join-group and unset igmp join-group commands are issues, the following warning message is generated:
This command is a deprecated command and cannot be saved to configuration. Please use the following new preferred syntax:
exec igmp interface if_name join-group group_addr [{ include | exclude| to_include |to_exclude} sources_ip ]
Cause:

Solution:
  • Beginning with ScreenOS 6.3.0, the exec join-group and exec leave-group commands have replaced the set igmp join-group and unset igmp join-group commands.

  • The exec join-group command replaces the set join-group command.

  • The exec leave-group command replaces the unset join-group command.

  • There is no impact on the functionality of the commands. The set and unset commands have been deprecated.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search