Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] How to configure the authentication mode for a WLC II device

0

0

Article ID: KB24780 KB Last Updated: 10 Oct 2020Version: 3.0
Summary:
This article provides information on how to configure the authentication mode for a WLC II device.
Symptoms:
  • RingMaster can authenticate to a controller, when sending configuration changes via enable password or username/password.

  • How to revert RingMaster to use enable password, if it is configured to use username/password.
Solution:
  1. Select your controller in RingMaster and click Authentication Mode.

  2. When AAA is selected, type the currently used username/password and select Enable from the drop-down menu.

  3. Click Finish and Deploy.

  4. In certain cases, deploy will not be pushed down; if so, undo changes under Devices/Local Changes and go through the process again.
Modification History:
2020-10-10: Archived article.
 
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search