Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] How to upgrade a SSG device via an USB drive

0

0

Article ID: KB26648 KB Last Updated: 11 Feb 2013Version: 1.0
Summary:
This article provides information on how to upgrade a SSG device via an USB drive.
Symptoms:
How to upgrade a SSG device via an USB drive.
Cause:
-
Solution:
To upgrade a SSG device via an USB drive, perform the following procedure:

  1. Insert the drive in the USB slot. The following output will be displayed:
    JetFlash Mass Storage Device, rev 2.00/1.00, addr 2, SCSI over Bulk-Only
    
    Mount usb device. Please wait...
    usb device (usb) ready.
  2. Execute the following command:
    save soft from usb <filename> to flash
    If it is a zipped file, it has to be unzipped. You should see the following output:
    ssg20-wlan-> save soft from usb ssg5ssg20.6.2.0r3.0 to flash   < Load configuration
    It will replace current image file with usb image ssg5ssg20.6.2.0r3.0.
    Do you want to continue... y/[n] y
    Load image from usb to flash: ssg5ssg20.6.2.0r3.0.
    
    Read ...............................................
    Save to flash. It may take a few minutes ...
    platform = 25, cpu = 12, version = 18
    update new flash image (02575760,15164962)
    platform = 25, cpu = 12, version = 18
    offset = 20, address = 5800000, size = 15164884
    date = 18e6, sw_version = 31008000, cksum = fb092e86
    Image authenticated!
    Program flash (15164962 bytes) ...
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++done
    
    ssg20-wlan-> get sys
    Product Name: SSG20-WLAN
    Serial Number: 0164102006002461, Control Number: 00000000
    Hardware Version: 0710(0)-(00), FPGA checksum: 00000000, VLAN1 IP (0.0.0.0)
    Software Version: 6.0.0r3.0, Type: Firewall+VPN < After loading, the firmware is not yet upgraded
    Feature: AV-K
    Compiled by build_master at: Mon Oct 29 13:52:18 PDT 2007
    Base Mac: 0017.cbea.e4c0
    File Name: ssg5ssg20.6.0.0r3.0, Checksum: 723c0c1d
    , Total Memory: 256MB
    
    Date 12/20/2011 17:38:04, Daylight Saving Time enabled
    The Network Time Protocol is Disabled
    Up 0 hours 6 minutes 54 seconds Since 20Dec2011:17:31:10
    Total Device Resets: 101, Last Device Reset at: 12/20/2011 12:20:50
    
    
    System in NAT/route mode.
    
    Use interface IP, Config Port: 80
    Manager IP enforced: False
    Manager IPs: 0
  3. Now, warm reset the device:
    ssg20-wlan-> reset  < reset the device
    System reset, are you sure? y/[n] y
    In reset ...
    
    Juniper Networks SSG20 Boot Loader Version 1.3.2 (Checksum: A1EAB858) Copyright (c) 1997-2006 Juniper Networks, Inc.
    Total physical memory: 256MB
    Test - Pass
    Initialization - Done
    Hit any key to run loader
    Hit any key to run loader
    Hit any key to run loader
    Hit any key to run loader
    Loading default system image from on-board flash disk...
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++done (size = 15,171,584 bytes)
    Image authenticated!
    Start loading...
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++done
    
    
    Juniper Networks, Inc SSG5/SSG20 System Software
    Copyright, 1997-2008
    
    Version 6.2.0r3.0 < firmware is now upgraded
    Load Manufacture Information ... Done
    
    Initialize FBTL 0........ Done
    Load NVRAM Information ... (6.0.0)Done
    Install module init vectors
    IPv6 is enabled
    Initializing IPv6
    Install modules (01128800,0209f5c0) ...
    PPP IP-POOL initiated, 256 pools
    
    Initializing DI 1.1.0-ns
    w3g_cfg_init
    
    System config (1519 bytes) loaded
    
    Done.
    Load System Configuration .................modem is not detected.......Disabled licensekey auto update
    ...............Done
    system init done..
    login: netscreen
    JetFlash Mass Storage Device, rev 2.00/1.00, addr 2, SCSI over Bulk-Only
    
    Mount usb device. Please wait...
    System change state to Active(1)
    usb device (usb) ready.
    
    Start wireless access point physical initialization...
    
    Wireless access point physical initialization done
    password:
    ssg20-wlan-> get sys
    Product Name: SSG20-WLAN
    Serial Number: 0164102006002461, Control Number: 00000000
    Hardware Version: 0710(0)-(00), FPGA checksum: 00000000, VLAN1 IP (0.0.0.0)
    Flash Type: Samsung
    Software Version: 6.2.0r3.0, Type: Firewall+VPN    < Upgrade is complete
    Feature: AV-K
    Compiled by build_master at: Mon Jul 6 12:39:52 PDT 2009
    Base Mac: 0017.cbea.e4c0
    File Name: ssg5ssg20.6.2.0r3.0, Checksum: 1238d94a
    , Total Memory: 256MB
    
    Date 12/20/2011 17:41:59, Daylight Saving Time enabled
    The Network Time Protocol is Disabled
    Up 0 hours 1 minutes 8 seconds Since 20Dec2011:17:40:51
    Total Device Resets: 101, Last Device Reset at: 12/20/2011 12:20:50
    
    
    System in NAT/route mode.
    
    Use interface IP, Config Port: 80
    Manager IP enforced: False
    Manager IPs: 0
    ssg20-wlan->
    ssg20-wlan->
  4. When the device boots up again, the upgrade process will be complete.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search