Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] Interpretation of the output of 'get led' for an SSG320/350M device



Article ID: KB26894 KB Last Updated: 17 Dec 2015Version: 2.0

This article provides guidance on interpreting the output of the get led command for an SSG320/350M device.


The output of the get led command is interpreted in different ways for different devices.


For SSG320/350M series firewalls, the output of the get led command is as follows:

  1. LED color codes:

    • 0: No color
    • 1: Green
    • 2: Amber/yellow
    • 3: Red
  2. LED ID value represents:

    • Alarm: 0
    • HA: 1
    • Status: 2
    • Config: 3
  3. If any LED is in the blinking state, the corresponding color value will be set to 0.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search