Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] When trying to configure a DIP group the 'All group member must be of the same IP version' error message is generated

0

0

Article ID: KB26934 KB Last Updated: 18 Feb 2013Version: 1.0
Summary:
This article describes the issue of the All group member must be of the same IP version error message being generated, when configuring a DIP group.
Symptoms:
The following configuration is set on the device:
set interface ethernet2/3 dip 6 1.1.1.10 1.1.1.10
set interface ethernet2/3 dip 7 1050::5:600:300c:327b 1050::5:600:300c:327b
Then the following DIP group is created:
FW-> set dip group 10

FW-> set dip group 10 member 6
FW-> set dip group 10 member 7
All the group member must be of the same IP version:
Failed command - set dip group 10 member 7
Cause:

Solution:
To implement the DIP group, DIP group members should be of the same IP version; that is either IPv4 or IPv6. You cannot create a DIP group, in which one member is IPv4 and the other member is IPv6.

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search