Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[SRX-IDP] Configuring IDP Trace options for Debugging

0

0

Article ID: KB27716 KB Last Updated: 04 Mar 2017Version: 2.0
Summary:

This article explains how to set the trace options for IDP on J-SRX devices.

Symptoms:

How to setup the IDP trace options?

Cause:

Solution:
traceoptions {
     file {
          filename;
          files number;
          match regular-expression;
          size maximum-file-size;
          (world-readable | no-world-readable);
     }
     flag all;
     level (all | error | info | notice | verbose | warning);
     no-remote-trace;
}



Configure the IDP tracing options:
  1. file: Configure the trace file options.

    1. filename: Name of the file to receive the output of the tracing operation.
      Enclose the name within quotation marks. All files are placed in the directory /var/log. By default, the name of the file is the name of the process being traced.
    2. files number: Maximum number of trace files.
      When a trace file named trace-file reaches its maximum size, it is renamed to trace-file.0, then trace-file.1, and so on, until the maximum number of trace files is reached. The oldest archived file is overwritten.
      If you specify a maximum number of files, you also must specify a maximum file size with the size option and a filename.
      Range: 2 through 1000 files
      Default: 3 files
    3. match regular-expression: Refine the output to include lines that contain the regular expression.
    4. size maximum-file-size: Maximum size of each trace file, in kilobytes (KB), megabytes (MB), or gigabytes (GB).
      When a trace file named trace-file reaches this size, it is renamed trace-file.0.
      When the trace-file again reaches its maximum size, trace-file.0 is renamed trace-file.1 and trace-file is renamed trace-file.0. This renaming scheme continues until the maximum number of trace files is reached. Then the oldest trace file is overwritten.
      If you specify a maximum file size, you also must specify a maximum number of trace files with the files option and a filename.
      Syntax: x K to specify KB, x m to specify MB, or x g to specify GB
      Range: 10 KB through 1 GB
      Default: 128 KB
      world-readable | no-world-readable: By default, log files can be accessed only by the user who configures the tracing operation. The world-readable option enables any user to read the file. To explicitly set the default behavior, use the no-world-readable option.
  2. flag: Trace operation to perform.
    all: Trace with all flags enabled
  3. level: Set the level of debugging the output option.all: Match all levels
    error: Match error conditions
    info: Match informational messages
    notice: Match conditions that should be handled specially
    Verbose: Match verbose messages
    warning: Match warning messages
  4. no-remote-trace: Set remote tracing as disabled.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search