Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

NS5-GT showing “link down, phy-link up” in dual untrust mode

0

0

Article ID: KB27989 KB Last Updated: 04 Oct 2013Version: 1.0
Summary:

NS5-GT showing "link down, phy-link up" in dual untrust mode.

Symptoms:

NS5-GT showing "link down, phy-link up" in dual untrust mode.

Cause:

Solution:

NS5-GT, when configured in dual untrust mode, shows ethernet3 as primary untrust and ethernet2 as a back-up untrust.

If  failover is enabled on the firewall then there is always only one interface as “link up, phy-link up” and the other as “link down, phy-link up”. If it is required that both the interfaces have “link up, phy-link up”, failover should be disabled on the firewall.

To disable failover, use the following command:

unset enable failover
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search