Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[WebappSecure/Mykonos] How to perform initial setup from WebappSecure 5.5 version



Article ID: KB29594 KB Last Updated: 20 Nov 2014Version: 1.0
TUI has been removed from WebappSecure version 5.5, the configuration is to be done through CLI. The KB provides information on configuring basic network settings for WebappSecure.
How to configure IP address and other networking settings on WebappSecure from version 5.5 onwards


Through console connection, configure the below settings:

cli system set hostname <hostname>
cli system set dns nameservers <dns_server_ip >
cli system set interface <interface-name> onboot yes bootproto static ipaddr <ip> netmask <netmask> gateway <gateway>

If the IP address is to be obtained through DHCP:
cli system set interface <interface-name> onboot yes bootproto dhcp

If management traffic and protected traffic are to be separated, then:
cli system set management-interface <interface>

NOTE: Any interface that is not a management interface is considered as a traffic interface (ie., traffic which is to be proxied and inspected by WebappSecure). If traffic and management are to be handlded by a single interface like in pre-5.5 releases, then above management-interface command is not needed.

After configuring hostname, DNS, interfaces, perform re-initialization:
cli system initialize

Once the initialization is complete, user can login to WebUI through https://<webappsecure-ip>:5000

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search