Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] Configurations are out of sync after upgrading one device to 6.3r21 and higher

0

0

Article ID: KB30693 KB Last Updated: 23 Dec 2015Version: 1.0
Summary:

After upgrading one cluster member from 6.3r19 or earlier to 6.3r21 and later, will report as configuration out of sync.

Symptoms:

On upgrade, the following error is shown:

Failed command - set zone "MGT" block
Cause:

This command is depreciated. In prior versions, it was set in the configuration by default, but you could not unset/remove the command.

Solution:

This is per design. In prior versions, the command was present in the configuration, but could not be changed (unset). As such, the command is not needed in the configuration.

Due to this change in design, the configurations will show as out of sync on the upgraded device. Once both devices are upgraded, the configurations should show as in sync.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search