Support Support Downloads Knowledge Base Service Request Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[SRX] Example Configuration - How to set static IPv6 NDP entries on Ethernet Interfaces

0

0

Article ID: KB31155 KB Last Updated: 23 Sep 2016Version: 1.0
Summary:

This article provides an example on how to set static IPv6 NDP entries on Ethernet Interfaces.

Solution:

By default, the device responds to a Neighbor Discovery Protocol (ARP) request only if the destination address of the NDP request is on the local network of the incoming interface. For Fast Ethernet or Gigabit Ethernet interfaces, you can configure static NDP entries that associate the IP addresses of nodes on the same Ethernet subnet with their media access control (MAC) addresses.

set interfaces ge-0/0/0 unit 0 family inet6 address 2001::1/64 ndp 2001::2 mac 3c:94:d5:ba:94:c0
set interfaces ge-0/0/0 unit 0 family inet6 address 2001::1/64 ndp 2001::2 publish
<-- Reply to NDP requests for this entry

Verification:

root@SRX# run show ipv6 neighbors
IPv6 Address Linklayer Address State Exp Rtr Secure Interface
2001::2 3c:94:d5:ba:94:c0 reachable 0 no no ge-0/0/0.0

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Security Alerts and Vulnerabilities

Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search