This article discusses the meaning of the following message:
router-re0 ffp[xxxxx]: %DAEMON-3: "dynamic-profiles": No change to profiles
This is a cosmetic log message and users can safely ignore it.
The following message is seen upon each commit:
router-re0 ffp[xxxxx]: %DAEMON-3:
"dynamic-profiles": No change to profiles
This message may appear on Junos that contain the JSM (Junos Subscriber Management) feature. The configuration parser checks if dynamic-profiles were modified upon commit and displays this message if it is not modified. The message will appear regardless if dynamic-profiles are configured.
Sample test
[edit]
lab@router-re0# run show configuration | display set | match dynamic
[edit]
lab@router-re0# run clear log messages
[edit]
lab@router-re0# show | compare
[edit]
lab@router-re0# commit | display detail | no-more
2016-11-04 19:45:15 XXX: Obtaining lock for commit
2016-11-04 19:45:15 XXX: updating commit revision
2016-11-04 19:45:15 XXX: UI extensions feature is not configured
2016-11-04 19:45:15 XXX: Started running translation script
2016-11-04 19:45:15 XXX: Finished running translation script
2016-11-04 19:45:15 XXX: start loading commit script changes
2016-11-04 19:45:15 XXX: no commit script changes
2016-11-04 19:45:15 XXX: no transient commit script changes
2016-11-04 19:45:15 XXX: finished loading commit script changes
2016-11-04 19:45:15 XXX: No translation output from the scripts
2016-11-04 19:45:15 XXX: copying juniper.db to juniper.data+
2016-11-04 19:45:15 XXX: finished copying juniper.db to juniper.data+
2016-11-04 19:45:15 XXX: exporting juniper.conf
2016-11-04 19:45:15 XXX: expanding interface-ranges
2016-11-04 19:45:15 XXX: finished expanding interface-ranges
2016-11-04 19:45:15 XXX: expanding groups
2016-11-04 19:45:15 XXX: finished expanding groups
2016-11-04 19:45:15 XXX: setup foreign files
2016-11-04 19:45:15 XXX: update license counters
2016-11-04 19:45:15 XXX: finish license counters
2016-11-04 19:45:15 XXX: propagating foreign files
2016-11-04 19:45:15 XXX: cdg returns = 7(persist groups is not configured (needed for cdg))
2016-11-04 19:45:15 XXX: complete foreign files
2016-11-04 19:45:15 XXX: dropping unchanged foreign files
2016-11-04 19:45:15 XXX: executing 'ffp propagate'
2016-11-04 19:45:15 XXX: daemons checking new configuration
2016-11-04 19:45:15 XXX: commit wrapup...
2016-11-04 19:45:15 XXX: start ffp activate
2016-11-04 19:45:15 XXX: executing 'ffp activate'
2016-11-04 19:45:16 XXX: activating '/var/etc/cosd.conf'
2016-11-04 19:45:16 XXX: activating '/var/etc/pam.conf'
2016-11-04 19:45:16 XXX: activating '/var/etc/pam_radius.conf'
2016-11-04 19:45:16 XXX: activating '/var/etc/pam_tacplus.conf'
2016-11-04 19:45:16 XXX: activating '/var/etc/issue'
2016-11-04 19:45:16 XXX: activating '/var/etc/certs'
2016-11-04 19:45:16 XXX: activating '/var/etc/motd'
2016-11-04 19:45:16 XXX: activating '/var/etc/max-db-size-cfg'
2016-11-04 19:45:16 XXX: activating '/var/etc/subs-mgmt-cfg'
2016-11-04 19:45:16 XXX: activating '/var/etc/ephinst.conf'
2016-11-04 19:45:16 XXX: executing foreign_commands
2016-11-04 19:45:16 XXX: /bin/sh /etc/rc.ui ui_setup_users (sh)
2016-11-04 19:45:16 XXX: not executing ui_commit in rc.ui
2016-11-04 19:45:16 XXX: finish ffp activate
2016-11-04 19:45:16 XXX: copying configuration to juniper.save
2016-11-04 19:45:16 XXX: db_check_constraint_ids_clear start
2016-11-04 19:45:16 XXX: db_check_constraint_ids_clear done
2016-11-04 19:45:16 XXX: db_groups_info_clear start
2016-11-04 19:45:16 XXX: db_groups_info_clear done
2016-11-04 19:45:16 XXX: activating '/var/run/db/juniper.data'
2016-11-04 19:45:16 XXX: Rotate backup configs
2016-11-04 19:45:16 XXX: ssync begins
2016-11-04 19:45:16 XXX: ssync ends
2016-11-04 19:45:16 XXX: ssync begins
2016-11-04 19:45:16 XXX: ssync ends
2016-11-04 19:45:16 XXX: notifying daemons of new configuration
2016-11-04 19:45:16 XXX: ssync begins
2016-11-04 19:45:16 XXX: ssync ends
2016-11-04 19:45:16 XXX: commit complete
commit complete
[edit]
lab@router-re0# run show log messages | match dynamic
Nov 4 19:45:16.068 router-re0 ffp[35483]: %DAEMON-3:
"dynamic-profiles": No change to profiles
Reference
- Set
dynamic-profiles
configuration.
A different message will appear if dynamic-profiles has been modified.
lab@router-re0# run clear log messages
[edit]
lab@router-re0# set dynamic-profiles test interfaces ge-1/0/0 unit $junos-interface-unit
[edit]
lab@router-re0# show | compare
[edit]
+ dynamic-profiles {
+ test {
+ interfaces {
+ ge-1/0/0 {
+ unit "$junos-interface-unit";
+ }
+ }
+ }
+ }
[edit]
lab@router-re0# commit
commit complete
[edit]
lab@router-re0# run show log messages | match dynamic
--- snip ---
Nov 4 19:53:14.261 router-re0 ffp[35622]: %DAEMON-3: "dynamic-profiles": Profiles are being modified
- Commit without configuration change.
[edit]
lab@router-re0# run show configuration | display set | match dynamic
set dynamic-profiles test interfaces ge-1/0/0 unit "$junos-interface-unit"
[edit]
lab@router-re0# show | compare
[edit]
lab@router-re0# commit
commit complete
[edit]
lab@router-re0# run show log messages | match dynamic
--- snip ---
Nov 4 19:54:32.746 router-re0 ffp[35660]: %DAEMON-3: "dynamic-profiles": No change to profiles
The router has dynamic-profiles configured and there is no configuration change.
This is a cosmetic log message and users can safely ignore the message.