Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Subscriber Management] SNMP does not get desired values after upgrading to Junos OS 15.1 and later

0

0

Article ID: KB31277 KB Last Updated: 15 Dec 2016Version: 1.0
Summary:

Interfaces MIB on all dynamic subscriber interfaces are enabled for Junos OS versions for Subscriber Management before 15.1. After upgrading to Junos OS 15.1 and later, static pp0 interfaces are disabled by default. This is an enhancement to achieve maximum performance. This article will explain how to enable representation of the Interface MIB for the specified dynamic interface as needed.

Symptoms:

Refer to the following output. Ten PPPoE subscribers have connected. But the command show snmp mib walk jnxPPPoEMIB gets PPPoE if up count is "0".

user@MX480> show subscribers summary                     
Subscribers by State
   Active: 20
   Total: 20
Subscribers by Client Type
   VLAN: 10
   PPPoE: 10        <-----Login 10 PPPoE subscribers
   Total: 20

user@MX480> show snmp mib walk jnxPPPoEMIB
2016 Oct 27 06:28:38 
jnxPPPoENextIfIndex.0 = 0
jnxPPPoESubIfNextIfIndex.0 = 0
jnxPPPoEMajorInterfaceCount.0 = 0
jnxPPPoESummaryMajorIfAdminUp.0 = 0
jnxPPPoESummaryMajorIfAdminDown.0 = 0
jnxPPPoESummaryMajorIfOperUp.0 = 0        <----- PPPoE if up count is "0".
jnxPPPoESummaryMajorIfOperDown.0 = 0
jnxPPPoESummaryMajorIfLowerLayerDown.0 = 0
jnxPPPoESummaryMajorIfNotPresent.0 = 0
jnxPPPoESummarySubInterfaceCount.0 = 0
jnxPPPoESummarySubIfAdminUp.0 = 0
jnxPPPoESummarySubIfAdminDown.0 = 0
jnxPPPoESummarySubIfOperUp.0 = 0
jnxPPPoESummarySubIfOperDown.0 = 0
jnxPPPoESummarySubIfLowerLayerDown.0 = 0
jnxPPPoESummarySubIfNotPresent.0 = 0
Cause:

SNMP support for enhanced subscriber management dynamic interfaces

Starting in Junos OS Release 15.1R3, SNMP support is available for enhanced subscriber management dynamic interfaces such as VLAN, PPP, and so on. An extension has been added to the Juniper Networks enterprise-specific Interface MIB to map enhanced subscriber management interfaces to logical route-mapping interfaces and to collect information about enhanced subscriber management interfaces. By default, data about enhanced subscriber management interfaces is not collected in the interfaces tables such as ifTable, ifXTable, and ifStackTable.

Solution:

To enable querying of enhanced subscriber management interfaces through the Interface MIB, the Interface MIB must be configured at the interface level by enabling the interface-mib statement at the [edit dynamic-profiles profile-name interfaces interface-name] hierarchy level.

set dynamic-profiles xxx interface pp0 interface-mib   <----- enable the interface-mib in dynamic-profile

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search