Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] [WLC] Limiting client sessions for each service-profile

0

0

Article ID: KB31381 KB Last Updated: 10 Oct 2020Version: 2.0
Summary:

A WLA radio can be configured to allow only a certain number of active client sessions, after which it will refuse connections from additional clients. This can be done for each service-profile.

This article explains how to configure a limit on the number of active client sessions allowed for each service-profile.

 

Solution:

Client sessions can be limited by configuring a CAC-session for the service-profile with the following command:

set service-profile profile-name cac-session <max-sessions>

The above command specifies the maximum number of active sessions that a radio can have when session-based call admission control (CAC) is enabled. When the radio reaches the maximum number of active sessions allowed, it will refuse connections from additional clients.

Note

  • The default number of sessions allowed is 14.
  • Usage: This command applies only when the CAC mode is set to session. If the CAC mode is none, the maximum number of sessions can be changed, but the setting does not take effect until you change the CAC mode to session. To change the CAC mode, use the above set service-profile cac-mode command.

Example: The following command changes the maximum number of sessions for the radios used by the service profile, sp1, to 10:

WLC# set service-profile <sp1> cac-session 10

 

Modification History:
2020-10-10: Archived article.
 
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search