Knowledge Search


×
 

[SRX] Example - Setting up NCP Exclusive Remote Access Client for SRX devices

  [KB33310] Show Article Properties


Summary:

This article describes how to set up the Network Control Protocol (NCP) Exclusive Remote Access Client for connecting to SRX devices, with an example.

Note: In this example, a Pre-Shared Key (PSK) in Aggressive mode has been used. Depending on the VPN setup required, various Internet Key Exchange (IKE) and IP Security (IPsec) parameters can be selected.

 

Solution:

To set up the NCP Exclusive Remote Access Client, perform the following steps:

  1. Click Configuration to set up a new connection profile:

  1. Select Profiles from the drop-down list:

  1. Click Add to set up the new profile:

  1. Enter a name for the new connection profile:

  1. Select a Communication Medium:

  1. Enter the IP address of the VPN Gateway:

  1. Enter the VPN User ID and Password for XAUTH:

  1. Select the IKE ID Type and enter the IKE ID:

  1. Verify the profile configuration and click OK:

  1. Select the IPsec option from the left menu and click Policy Editor under IKE Policy to set up a new IKE policy: