Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[SRX] Example - Setting up NCP Exclusive Remote Access Client for SRX devices



Article ID: KB33310 KB Last Updated: 21 Nov 2018Version: 1.0

This article describes how to set up the Network Control Protocol (NCP) Exclusive Remote Access Client for connecting to SRX devices, with an example.

Note: In this example, a Pre-Shared Key (PSK) in Aggressive mode has been used. Depending on the VPN setup required, various Internet Key Exchange (IKE) and IP Security (IPsec) parameters can be selected.



To set up the NCP Exclusive Remote Access Client, perform the following steps:

  1. Click Configuration to set up a new connection profile:

  1. Select Profiles from the drop-down list:

  1. Click Add to set up the new profile:

  1. Enter a name for the new connection profile:

  1. Select a Communication Medium:

  1. Enter the IP address of the VPN Gateway:

  1. Enter the VPN User ID and Password for XAUTH:

  1. Select the IKE ID Type and enter the IKE ID:

  1. Verify the profile configuration and click OK:

  1. Select the IPsec option from the left menu and click Policy Editor under IKE Policy to set up a new IKE policy:

  1. Enter the IKE Policy name and select the IKE parameters: