Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] Adding a RADIUS server to WLC via WebGUI



Article ID: KB33548 KB Last Updated: 21 Mar 2020Version: 2.0

This article details the procedure to add a RADIUS server to the Wireless Controller (WLC) via WebGUI.


To add a RADIUS server to WLC, perform the following steps:​

  1. Log in to WLC.

  1. Click the Configure tab.

  1. Click the RADIUS option under AUTHENTICATION.

  1. Click Add RADIUS Server.

  1. Enter the server details (that is, IP address and Shared secret key) and click Finish.

  1. After adding the RADIUS server to WLC, click "Save configuration" at the top-right corner. ​

Validating via CLI
  1. Use the following command to validate the same via the Command Line Interface (CLI):

#show radius​ ​


Modification History:

2020-03-21: Archived

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search