Knowledge Search


[WLC] Configuring an NTP server in WLC via WebView

  [KB33612] Show Article Properties


This article explains how to configure a Network Time Protocol (NTP) server in Wireless Controller (WLC) via WebView.



To configure an NTP server in WLC, perform the following steps:

  1. Log in to WLC WebView.

  1. Click Configure > General tab.

  1. Click the Time tab.

  1. Select the Enable NTP check box, and then enter the NTP server address and Timezone.

  1. Click Apply and save the configuration.


Verification on Command Line Interface

  1. We can verify the same on WLC CLI by using the following command:
#show ntp


Related Links: