Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] Configuring an NTP server in WLC via WebView



Article ID: KB33612 KB Last Updated: 21 Mar 2020Version: 2.0

This article explains how to configure a Network Time Protocol (NTP) server in Wireless Controller (WLC) via WebView.


To configure an NTP server in WLC, perform the following steps:

  1. Log in to WLC WebView.

  1. Click Configure > General tab.

  1. Click the Time tab.

  1. Select the Enable NTP check box, and then enter the NTP server address and Timezone.

  1. Click Apply and save the configuration.


Verification on Command Line Interface

  1. We can verify the same on WLC CLI by using the following command:
#show ntp


Modification History:

2020-03-21: Archived

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search