Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[CSD] Device does not show up as the correct device in Connectivity Services Director

0

0

Article ID: KB33724 KB Last Updated: 22 May 2020Version: 2.0
Summary:

An MPLS device does not show up as MPLS device in CSD (Connectivity Services Director). This article explains how to troubleshoot this problem and resolve it.

 

Solution:

Check the configuration on the device and make sure the following is configured for that device to appear as an MPLS device on CSD:

set protocols mpls label-switched-path to <ip address>

After adding the configuration and committing, perform the following:

  1. Re-synchronize the device with CSD.

  2. Re-discover roles via Prestage devices.

 

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search