Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[EX] Commit check displays error if interface speed is configured manually for 10G interfaces



Article ID: KB34183 KB Last Updated: 18 Jul 2019Version: 1.0

In a mixed Virtual Chassis scenario where one of the linecards is EX4300, the commit check operation will produce an error if the interface speed is configured manually for 10G interfaces.

interfaces {
    xe-0/0/0 {
        speed 100m;

configuration check succeeds
/config/juniper.conf:558:(18) invalid value: 100m
/config/juniper.conf:574:(18) invalid value: 100m
/config/juniper.conf:630:(9) error recovery ignores input until this point: }
error: remote unlock-configuration failed on fpc1

This is an expected behavior, as EX4300 is functioning as a linecard will perform independent syntax check. It will inform about an unsupported interface speed of 100M, which is configured on 10G interface. 

This error message will be displayed only during the commit check operation. The error will be ignored and configuration will be applied if the configured interface is on other non-EX4300 Virtual Chassis member, which supports the configured interface speed.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search